Saturday, May 14, 2016

Inside the Technics Tonearm


Recently I began having to replace the poor RCA wires that came equipped on my Technics SL 1200 M3D's turntables.  Taking the Tone arm out was relatively easy.  You just have to be really precise when you solder the wires to the board and have to really squeeze the wire through a small snap when piecing the turntable back together (make sure the wires are not too thick like good Gold plated ones can be).  I got a nice solid wire from guitar center and cut it (3ft).  The ground wire is connected to the gold screw.  I didn't replace that.  Make sure you put a new plastic tie to hold to the board tightly.  This will absorb some of the tugs!  All the instruction on how to do this are on Youtube and online ;^)
Notice the small wires on this one.  A good reference in case you you have to rewire tonearm!  I'm saving that for a Technics SL 1200 that I'm rebuilding!

Thursday, May 12, 2016

Replacing my Neck on my Fender Strat Mim and I found!...

A Squier name on my 1992/3 Fender Body! Only theres more to the story!...
https://spinditty.com/instruments-gear/The-Fender-Squier-Series-Stratocaster-Not-A-Typical-Squier

Wow, after reading this article it turns out that initially "Squier Series" used quality parts still so they were able to interchange the bodies for the MIM strats.  The electronics were cheaper but I already knew I needed to upgrade those!
Phew.  Good article.

Funny thing is, it was the Mim neck that was officially Fender that really sucked!  Thing twisted everytime I looked at it wrong!  I got me a real straight neck via Carl's Custom Amps in Las Cruces!  Thing is a beauty and it can be fitted with vintage tuners too :)